X85; „ Custom - Konica Minolta CM-25cG Instruction Manual

Custom
… „
Select the items, including the color space, color difference equation, or index, to be used.
Up to 14 items (Custom 01 to Custom 14) to be displayed can be set.
The custom display items are set to "None" when the instrument is shipped from the factory.
Memo
Operating Procedure Start the procedure from the <Measurement cond.> - <Display cond.> screen.
1
Use [] or [] to move the cursor to "Custom xx (01
to 14)", and then press the [Confirmation] key.
The screen for selecting the display items is displayed.
The scroll bar at the right on the screen shows that there
are additional display items that cannot fit on the screen.
2
Use [] or [] to move the cursor to the desired
display item.
Moving the cursor past the top or bottom of the list will
show additional display items that cannot fit on the screen.
Settings
The following indexes as well as display color values and
color differences for color spaces that can be configured
under color space and color difference equation can be set.
WI ASTM E313-73 and ΔWI
{ „
WI CIE and ΔWI
{ „
Tint CIE and ΔTint
{ „
YI ASTM E313-73 and ΔYI
{ „
YI ASTM D1925 and ΔYI
{ „
ISO Brightness and ΔB
{ „
ΔE99o
{ „
MI
{ „
GU and ΔGU
{ „
None
{ „
UE1 to UE3
{ „
UC1 to UC3
{ „
3
Press the [Confirmation] key to confirm, and then press [ESC].
The selection is confirmed and the screen returns to the previous screen.
If [ESC] is pressed without pressing the [Confirmation]
Notes
key, the settings will not be changed and the screen will
return to the <Display cond.> screen.
: Whiteness index (ASTM E313-73)
: Whiteness index (CIE)
: Tint (CIE)
: Yellowness index (ASTM E313-73)
: Yellowness index (ASTM D1925)
: Brightness
: ΔE99o (DIN99o) color difference equation
: Metamerism
: Gloss index
: User equations
Sample 0003 Bumper
Measurement cond.
Display cond.
Display type
Color space
L*C*h
Equation
CMC
Custom 1
L
Custom 1
L*
a*
b*
∆L*
∆a*
∆b*
C*
h
∆C*
∆H
L
3
86