Names And Functions Of Parts - Konica Minolta CM-25cG Instruction Manual

Names and Functions of Parts

1 LCD screen
2 Control panel
3 Charging lamp
4 Power switch
5 Measurement button
6 Viewfinder
(Specimen confirmation
window)
7 Viewfinder lever
8 USB connection terminal
(Micro-B type)
9 Wrist strap attachment hole
15
1
6 5 7
Displays settings, measurement results, messages, etc.
The keys are used to switch screens and to select, set, or save settings. For
details, refer to page 21 "Control Keys".
Lights up orange when charging via USB power. When charging is
complete, the lamp will turn green.
Used to turn ON/OFF power. The instrument switches between ON/OFF
every time the power switch is pressed.
Used to perform measurement. A measurement button can be found on
both the right and left sides of the instrument. Either button can be used
for measurement.
Using the window, users can confirm the measurement location of the
specimen. Open the shutter to check the measurement location of the
specimen. These windows can be found on both the left and right of the
instrument.
This lever opens the specimen confirmation window. These windows can
be found on both the left and right of the instrument.
Used to connect the instrument to a PC when using the supplied USB cable
(IF-A26).
Used to attach the wrist strap.
2 3 4
8
9