Measurement - Konica Minolta CM-25cG Instruction Manual

Measurement

• Prior to the start of measurement, be sure to perform white calibration. For details, refer to "White
Notes
Calibration and Gloss Calibration" on page 34.
• To display the color difference, target colors must be set before measurement.
• To measure a target, select the target number before measurement.
• For accurate measurement, make sure to keep measurement conditions (ambient temperature, etc.)
constant.
Operating Procedure
1
Press [ ] to bring up the [Target] or [Sample]
screen, depending on the objective.
The <Target> screen or the <Sample> screen is
displayed.
Note: If the menu screen is displayed, press [ESC] and
perform the operation after the Results Display screen is
displayed.
2
Set the specimen measuring port on the sample to measure.
• Take care to prevent displacement or tilting from occurring.
• Using the optional stapler type target mask (CM-A216) makes it possible to determine the measurement
position more accurately.
MEASURING
Measuring
3
Press the measurement button.
The specimen is measured and the results are displayed on
the screen.
• The selected number will be used as the target data
number. If data is already present for that number, a
confirmation dialog will ask if the data should be
overwritten. Press the [Confirmation] key to overwrite.
• The sample data No. is automatically assigned
sequentially in the order of measurements.
• When the number of sample data sets stored in the memory reaches 7,500, "The device memory is full. Please
Memo
delete some data to measure." will be displayed, indicating that some data sets must be deleted before
measurement is possible.
Sample
0003 Bumper
Sample
0003
10°/D65 2°/C
99.06 99.01
L*
-0.05 -0.04
a*
0.02 0.05
b*
0.07 0.05
∆ L *
-0.01 0.06
∆ a *
0.00 -0.04
∆ b *
0.07 0.09
∆ E * a b
94.06 94.06
GU
0.10 0.10
∆ G U
0.08 0.08
MI
2016/07/21 13:52:16
0002 Panel
○ ○ ● ○ ○ ○ ○ ○
To measure concave surfaces, as
shown in the following figure, use the
standard flat type battery cover
(CM-A218).
Sample
0003 Bumper
No Name
0004
10°/D65 2°/C
99.07 99.03
L*
-0.09 -0.05
a*
0.03 0.01
b*
0.08 0.07
∆ L *
-0.05 0.05
∆ a *
0.01 -0.08
∆ b *
0.09 0.12
∆ E * a b
94.26 94.26
GU
0.10 0.10
∆ G U
0.13 0.13
MI
2016/07/21 11:56:14
0002 Panel
○ ○ ● ○ ○ ○ ○ ○
2
MAV
MAV
38