Table of Contents
Advertisement
Edit Name
„
„
Name the target color data.
Operating Procedure
Start the procedure from the <Target menu> screen.
1
Use [] or [] to move the cursor to "Edit name",
and then press the [Confirmation] key.
The <Edit name> screen is displayed.
2
Use []/[] or []/[] to move the cursor
between characters, and then press the
[Confirmation] key.
• Up to 30 characters can be used.
• The selected character is displayed in the text box.
3
2
Repeat step
until the necessary characters have
been entered.
• To delete the character to the left of the cursor in the text
box, move the cursor to [×] and press the
[Confirmation] key.
4
After inputting the characters, move the cursor to
[OK] and press the [Confirmation] key.
The setting is confirmed and the screen returns to the
<Target> screen.
• If [ESC] is pressed during configuration, or if the cursor is
Memo
moved to "Cancel" and the [Confirmation] key is
pressed, the settings will not be changed and the screen
will return to the <Target menu> screen.
• When using a barcode reader, barcodes can be used on
the <Edit name> screen. Refer to pages 103 to 105
"Connecting to a Printer/Barcode Reader" for information
on connecting a barcode reader.
Target
Target menu [0003]
Print data
Edit name
Bumper
Data management
⏎
Pass/Fail
⏎
0003Bumper45
ABCDEFGH|
A B C D E F
G H I J K L
M N O P Q R
S T U V W X
Y
Z . _ (
)
ABC/abc/123
OK
Cancel
2
54
Advertisement
Chapters
Table of Contents
Troubleshooting
