Table of Contents
Advertisement
Measurement Condition Settings
This instrument requires measurement condition settings (measurement mode, average count, observer/
illuminant, and display) to be configured before measurement can be started.
Measurement Condition Settings
„
„
To set measurement conditions, select the setting from the <Measurement cond.> menu. The following four items
can be specified as the measurement conditions:
• Measurement mode : S elect the combination of colorimetry and gloss measurement.
• Measurement setup
• Observer/Illuminant : C onfigure the two observers/illuminants.
• Display cond.
Operating Procedure
1
Press [MENU], and then use [] or [] to display the
<Measurement cond.> menu screen.
To return to the previous screen, press [MENU] or [ESC].
Memo
73
: S pecify the number of measurements for automatic and manual averaging.
: C onfigure the display type, color space, color difference equation, and 14 custom
display items.
Sample
0003 Bumper
Measurement cond.
Measurement mode
Color & Gloss
Measurement setup
⏎
Observer/Illuminant
⏎
Display cond.
⏎
Advertisement
Chapters
Table of Contents
Troubleshooting
