X84; „ Display Condition Settings; Display Condition Settings - Konica Minolta CM-25cG Instruction Manual

Display Condition Settings

„ „
To set display conditions, select "Observer/Illuminant" from the <Measurement cond.> menu screen.
The following two observer/illuminant settings can be configured for the display conditions.
• Observer/Illuminant 1: Select the observer/illuminant used to measure the colorimetric data.
• Observer/Illuminant 2: Select the secondary illuminant used for MI (metamerism index) calculation, etc.
Operating Procedure Start the procedure from the measurement screen.
1
Press [MENU], and then use [] or [] to display the
<Measurement cond.> menu screen.
To return to the previous screen, press [MENU] or [ESC].
Memo
2
Use [] or [] to move the cursor to "Observer/
Illuminant", and then press the [Confirmation] key.
The <Observer/Illuminant> screen is displayed.
3
After setting the observer/illuminant, press [ESC] to
return to the previous screen.
Sample 0003 Bumper
Measurement cond.
Measurement mode
Color & Gloss
Measurement setup
⏎
Observer/Illuminant
⏎
Display cond.
⏎
Sample 0003 Bumper
Measurement cond.
Observer/Illuminant
Observer/Illuminant 1
10°/D65
Observer/Illuminant 2
2°/A
3
78