Table of Contents
Advertisement
Auto Power Off
…
„
The amount of time before switching the power off can be set.
Auto power off is set to "0 (minute)" (no auto power off) when the instrument is shipped from the factory.
Memo
Operating Procedure
Start the procedure from the <Setting> - <Instrument setup> screen.
1
Use [] or [] to move the cursor to "Auto power
off", and then press the [Confirmation] key.
The <Auto power off> setting screen is displayed.
2
Use [] or [] to change the value.
Settings
00 to 60 minutes
{
„
If set to "00", no auto power off.
Memo
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed, and the screen returns to the
<Instrument setup> screen.
If [ESC] is pressed without pressing the [Confirmation]
Notes
key, the settings will not be changed, and the screen will
return to the <Instrument setup> screen.
Sample
0003 Bumper
Setting
Instrument setup
Date & time
2016/07/21
Brightness
3
Beep
ON
Auto power off
0 (minute)
Auto power off
01
/
60
3
94
Advertisement
Chapters
Table of Contents
Troubleshooting
