Additional Functions; Measurement; Setting The Number Of Measurements For Automatic Average; Display - Konica Minolta CR-400 Instruction Manual

Additional Functions

1. Measurement

<Setting the Number of Measurements for Automatic Average>
It is possible to set the number of measurements for average to 1-30 times.
See P.72 "Basic Setting" for details on how to set this.
• The number of measurements is displayed at the bottom of the
LCD.
• Only the average is stored.

2. Display

<Changing the Display>
• It is possible to display a larger font, in which case either the absolute value or the color
difference is displayed.
When the measuring head is disconnected from the data processor and used, the display at the
time of disconnection remains.
See P.81 "Screen Display and Changing the Display" for how to set this.

3. User Calibration

Absolute value/
color difference
• The selected display is maintained until removal from the data processor.
See P.131 "User Calibration Procedure Flow" for the relationship between the multi-calibration and

manual select calibration.

<Multi-Calibration>
This performs multi-calibration.
See P.135 "Setting the Multi-calibration" for details on how to set.
<Manual Select Calibration>
This selects the user calibration channel to calibrate.
See P.137 "Setting the Manual Select Calibration" for details on how to set.
54
Numbers of measurement
is set to 3 times.
Absolute value only
Color difference only