X85; „ Change Target Reference - Konica Minolta CM-25cG Instruction Manual

Change Target Reference
… „
The target data acting as a reference for the sample data can be changed.
Display the sample for which the target reference is to be changed on the <Sample> screen in advance.
Setting Procedure
1
Use [] or [] to move the cursor to "Change
Target reference", and then press the [Confirmation]
key.
The <Change Target reference> screen is displayed.
2
The target color data number being used will be
displayed. Use [] or [] to move the cursor to the
color difference reference color number, and then
press the [Confirmation] key. When the target color
data is set, the screen returns to the <Sample>
screen.
• If [ESC] is pressed, the target changes will not be applied
and the screen will return to the <Data management>
screen.
If a number to which no color difference target data has
Notes
been set, the target will be determined as "None" and
the color difference and pass/fail judgment will not be
displayed.
47
Start the procedure from the <Sample menu> - <Data management> screen.
Sample 0003 Bumper
Sample menu [0001]
Data management
Delete data
Set Sample as Target
Change Target reference
0003 Bumper
Change list position
Change Target reference
0808: Bumper45
2016/07/21 11:50:12
0808 / 2500
OK Cancel