X84; „ Measurement Option Settings; Measurement Option Settings - Konica Minolta CM-25cG Instruction Manual

Measurement Option Settings

„ „
To set measurement options, select "Measurement setup" from the <Measurement cond.> menu screen. Select or
specify the following items as the measurement options:
• Auto average (1 to 10)
• Manual average (1 to 30) : Specify the number of measurements for manual averaging.
• Manual average option
Operating Procedure
1
Press [MENU], and then use [] or [] to display the
<Measurement cond.> menu screen.
To return to the previous screen, press [MENU] or [ESC].
Memo
2
Use [] or [] to move the cursor to "Measurement
setup", and then press the [Confirmation] key.
The <Measurement setup> screen is displayed.
3
After setting the measurement conditions, press the
[ESC] button to return to the previous screen.
75
: Specify the number of measurements for auto averaging.
: Select the save method when performing manual averaging.
Start the procedure from the measurement screen.
Sample 0003 Bumper
Measurement cond.
Measurement mode
Color & Gloss
Measurement setup
⏎
Observer/Illuminant
⏎
Display cond.
⏎
Sample 0003 Bumper
Measurement cond.
Measurement setup
Auto average
1 Times
Manual average
1 Times
Manual average option
Manual save