Konica Minolta CM-25cG Instruction Manual page 104

2
Use [] or [] to move the cursor to "ON", and then
press the [Confirmation] key.
The instrument's Bluetooth function is turned ON and the
display will return to the <Communication setup> screen.
The Bluetooth icon will be displayed in the status bar.
To configure the Bluetooth PIN code, go to step 3 to
continue.
3
Use [] or [] to move the cursor to "Meter PIN
code", and then press the [Confirmation] key.
The <Meter PIN code> screen is displayed.
• The initial value of the PIN code is "0000".
4
 and  will be displayed above and below the PIN.
Use [] or [] to specify a value. Use [] or [] to
move between digits.
• The personal identification number (PIN) should consist
of between four and eight numbers (0 to 9).
5
After inputting the value, press the [Confirmation]
key.
The display will return to the <Communication setup>
screen.
101
Bluetooth
OFF
ON
Sample 0003 Bumper
Setting
Communication setup
Auto print
OFF
Bluetooth
ON
Meter PIN code
0000
Printer address
000000000000
Sample
0003Bumper45
Meter PIN code
01234567
0 1 2 3 4 5
6 7 8 9
OK Cancel