X85; „ Edit Target Filter - Konica Minolta CM-25cG Instruction Manual

Edit Target Filter
… „
The filter function makes searching for a target easier. The function allows only selected target data to be displayed
by selecting only saved data or by selecting a group created in advance.
The Edit Target filter is set to "OFF" when the instrument is shipped from the factory.
Memo
Operating Procedure Start the procedure from the <Target menu> - <Data management> screen.
1
Use [] or [] to move the cursor to "Edit Target
filter", and then press the [Confirmation] key.
The <Edit Target filter> screen is displayed.
2
Use [] or [] to move the cursor to the desired
item.
Settings
OFF : All target color data will be displayed.
{ „
only saved data : Displays only data for the set target.
{ „
only group : Only targets that satisfy all of the
{ „
group conditions displayed below are
displayed. Select and press the
[Confirmation] key to display the
group selection screen. With the
cursor on the group numbers, press
the [Confirmation] key. Using [] or
[] to select the group number
displays the group name set for the
default group. Press the
[Confirmation] key to confirm, and
press [OK] to return to the <Data
management> screen.
3
Press the [Confirmation] key. (With [OFF] and [only
saved data])
The selection is confirmed and the screen returns to the
<Target> screen.
If [ESC] is pressed without pressing the [Confirmation]
Notes
key, the settings will not be changed and the screen will
return to the <Data management> screen.
Target
Target menu [0003]
Data management
Delete data
Set group
[01]
Change list position
Edit Target filter
OFF
Edit Target filter
OFF
only saved data
only group
01 Panel1
02 Panel2
03 Panel3
Edit Target filter
01 Panel1
02 Panel2
03 Panel3
00
00
OK Cancel
2
58