Table of Contents
Advertisement
Handling the Instrument
White Calibration Cap CR-A86
The white calibration cap, constructed as shown below, is used for performing white calibration.
Notes
• When the white calibration cap is not being used, keep it away from external light and dust by putting on the dedicated lid and storing it.
Using the White Calibration Cap
(Cont.)
CR-20
White calibration cap
Placing
❶
Hold the instrument securely.
❷
Place the white calibration cap with the
white calibration area upward, and place
the instrument on top so that the target
mask fi ts over the white calibration area.
Notes
Do not fi x the white calibration cap to
the instrument.
Removing
❶
Remove the instrument from the white
calibration cap, and attach the lid to the
cap.
16
Advertisement
Table of Contents
