Table of Contents
Advertisement
Warning Level Setting
…
„
The warning level is set to "80%" when the instrument is shipped from the factory.
Memo
Operating Procedure
1
Use [] or [] to move the cursor to "Warning
level", and then press the [Confirmation] key.
The <Warning level> screen is displayed.
2
Use [] or [] to change the value.
Settings
000 to 100%
{
„
3
Press the [Confirmation] key after completing the
changes.
The setting is confirmed and the screen returns to the
<Default data setup> screen.
If [ESC] is pressed during configuration, the settings will
Notes
not be changed and the screen will return to the
<Default data setup> screen.
67
Start the procedure from the <Setting> - <Default data setup> screen.
Sample
0003 Bumper
Setting
Default data setup
Default tolerance
Warning level
0%
Parametric coef.
Set group
Warning level
Fail
088
%
Pass
OK
Cancel
Advertisement
Chapters
Table of Contents
Troubleshooting
