X8B; „ Connecting To A Printer/Barcode Reader; X84; Printer/Barcode Reader Preparation - Konica Minolta CM-25cG Instruction Manual

Hide thumbs Also See for CM-25cG:
Table of Contents

Advertisement

Connecting to a Printer/Barcode
Reader
Connecting the instrument to a printer or barcode scanner via the Bluetooth function enables printing of various
data such as measurement results or scanning of names for data to save to the instrument.
• With the CM-A219 Bluetooth module installed, the Bluetooth function of this instrument enables data
Notes
communication to a PC, data printing to the CM-A234 Bluetooth printer, and reading of data names from a
barcode scanner. However, connecting to both the Bluetooth module and a PC is not possible.
• Using a printer other than the CM-A234 optional Bluetooth printer may result in incorrect operation.
• Printing is possible at distances up to 10 m, but the distance at which operation can be performed properly
depends on the wireless environment around the device.
• The optional accessory Bluetooth printer CM-A234 can only print text. Spectral graphs, color difference
graphs, and other graphics displayed on the instrument cannot be printed.
• To connect the instrument to a printer or barcode scanner via the Bluetooth function, appropriate preparations for
Memo
Bluetooth communication must be performed in advance for both the instrument and the printer or barcode
reader.
• Bluetooth communication with the instrument supports the Serial Port Profile (SPP).
Printer/Barcode Reader Preparation
{
The following section describes the preparations required for ensuring that the instrument recognizes the
separately available Bluetooth printer (CM-A234) or a barcode reader as a Bluetooth device.
This section describes general procedures. For more information, please refer to the instruction manuals
Notes
included with the Bluetooth printer (CM-A234) and the barcode reader.
Operating Procedure
1
Ensure use of the Bluetooth printer / barcode reader
is possible.
‹ Verify that the printer/reader communication mode is
set to Bluetooth. In addition, charge batters and load
printer paper as required.
2
Verify the Bluetooth address and PIN code of the
printer/reader.
103

Advertisement

Table of Contents
loading

Table of Contents