X85; „ Connecting The Ac Adapter; X85; „ Turning The Power On/Off - Konica Minolta CM-25cG Instruction Manual

Connecting the AC Adapter
… „
• The lithium-ion battery must always be installed, even when using external power.
Notes
• To supply AC power to the instrument, always use the AC adapter (AC-A305J/L/M) supplied with the
instrument.
• Firmly push the AC adapter power plug or USB cable completely into the outlet.
Powering the instrument from the USB cable will charge the lithium-ion battery. While the battery is charging, the
Memo
charging lamp on the instrument's panel will light up orange. When charging is complete, the lamp will turn green.
Operating Procedure
1
Open the connector's protective cover, and connect
the USB cable to the USB port on the instrument.
2
Connect the USB cable to the AC adapter, and then
connect the AC adapter plug to a 100-240 VAC
(50/60 Hz) power outlet.
Turning the Power ON/OFF
… „
Operating Procedure
Turning the Power ON
1
With the power OFF, press and hold the power
switch for about 1 second.
The power will turn ON.
• When first turning the instrument ON after purchasing,
Notes
the language setting screen will be displayed, followed
by the date and time setting screen. Configure the
settings according to pages 89 and 91.
Operating Procedure
Turning the Power OFF
1
Press and hold the power switch for about 1 second.
The power will turn OFF after the settings have been
saved.
When powered by the battery, the instrument will turn OFF
Memo
automatically after 5 minutes of inactivity.
Due to data protection within the instrument, powering
down may take several seconds to several tens of seconds.
2
30