Table of Contents
Advertisement
Connecting via Bluetooth
z
„
Connect the instrument to a PC with Bluetooth communication functionality using the optional Bluetooth module.
• The instrument's Bluetooth function enables data communication with a connected PC and printing from a
Notes
Bluetooth computer. Connecting to both a PC and a printer/scanner at the same time, however, is not
possible.
• A simultaneous connection via the USB cable and the Bluetooth function is not possible. Should both
connections be established at the same time, priority will be given to the connection via USB cable.
To connect the instrument to a PC via the Bluetooth function, appropriate preparations for Bluetooth communication
Memo
must be performed in advance for both the instrument and the printer.
Instrument Preparation
{
„
Attach the optional Bluetooth module (CM-A219).
Turn ON the instrument's Bluetooth function and configure the PIN code on the instrument as required.
Connecting the Bluetooth Module
•
„
Operating Procedure
1
Slide open the instrument's battery compartment cover and attach the Bluetooth module.
Notes
When inserting the Bluetooth module, please note that the
module will be slightly loose. Pushing forcibly on the module may
damage the connector if the module and the connector on the
instrument are not aligned correctly. The module and the
connector on the instrument will be aligned correctly if the line on
the side of the module is no longer visible when the module is
dropped into the slot. Push the module in from this position until it
clicks (approx. 1 mm).
2
Slide the battery compartment cover to close it.
99
A line can be seen on the side of the module.
Insert with the orientation aligned to this position.
Advertisement
Chapters
Table of Contents
Troubleshooting
