X84; Pc Connection - Konica Minolta CM-25cG Instruction Manual

PC Connection
{ „
With the PC as a host, a connection to the instrument can be established using Bluetooth communication.
Operating Procedure
1
Verify that the instrument power has been turned
ON.
2
Verify that the Bluetooth function on the instrument
has been turned ON. Also make sure the Bluetooth
function is not being used to connect to a printer
and that the USB cable is not being used to connect
to the PC.
3
Start the Bluetooth utility on the PC.
4
Search for nearby Bluetooth devices, and select
"CM-A219" from the list of displayed devices.
5
Enter the PIN code for the instrument (refer to step 4
on page 101) on the PC.
6
Open the Bluetooth serial port to connections.
Once the connection has been established, the remote icon
will be displayed in the status bar on the instrument.
Sample 0003 Bumper
Setting
Communication setup
Auto print
OFF
Bluetooth
ON
Meter PIN code
0000
Printer address
000000000000
4
102