X85; „ Inserting The Battery - Konica Minolta CM-25cG Instruction Manual

Inserting the Battery
… „
This instrument can be powered from a lithium-ion battery, but use of the AC adapter or USB bus power is
recommended for extended periods of use. A lithium-ion battery installed in the instrument will be charged
whenever the AC adapter or USB bus power is used, regardless of whether the instrument is turned ON or OFF.
When using USB bus power, use a PC that meets IEC 62368-1 (Audio/video, information and communication
Notes
technology equipment - Part 1: Safety requirements) standards.
CAUTION
• Do not touch or short-circuit the terminals in the battery compartment. Doing so may damage the instrument.
Operating Procedure
1
Turn the instrument power OFF by pressing the
power button.
2
Slide the battery compartment cover on the bottom
of the instrument.
3
Rotate the battery retainer and insert the
lithium-ion battery. (Follow the indications in the
battery compartment to avoid confusing the battery
polarity.)
4
Slide the battery compartment cover to close it.
29