Setting Printing Restrictions On Each Registered User - Konica Minolta bizhub C3100i User Manual

6.
Specify [User Name], [Password] and [Retype Password], then click on [Add].

Setting Printing Restrictions on Each Registered User

To use this feature, settings in the printer driver/application, operator panel and Internet Services are
required.
You can set the following restrictions:
 "Permitting Printing Only in Black and White" (P.81)
 "Limiting the Number of Pages Printable in Color/Black and White" (P.83)
Permitting Printing Only in Black and White
Configuring Authentication Settings on the Print Driver/Application
Specify account information (user name and password) that is required for authentication when
printing from a print driver or an application.
This section describes the procedure using the PCL driver as an example.
1.
Click on [Start] > [Windows System] > [Control Panel] > [View devices and printers] or [Devices
and Printers].
2.
Right-click on the machine icon, and select [Printer properties].
3.
Click on [Configuration].
4.
Click on [Accounting].
5.
Select [Enable Account Setup] in [Accounting System].
6.
From [Account Mode], select [User].
7.
Specify a user account (user name and password).
When displaying a dialog box to enter a user account every time a job is submitted:
1)
Select [Prompt User for Entry when Submitting Job].
2)
Select the checkboxes for [Display Last Entered User Details] and [Mask User ID (***)] as
necessary.
When you use a Windows login name as your user name and normally use the same account:
1)
Select [Always Use Default User Details].
2)
From [Specify Job Owner Name], select [Use Login Name].
3)
Configure [Passcode] settings.
When always using the same user account by specifying a user name manually:
1)
Select [Always Use Default User Details].
2)
From [Specify Job Owner Name], select [Enter owner name].
3)
Configure [User ID] and [Passcode] settings.
7.3 Using Print Accounting
81