GE F650 Instruction Manual page 442

7 IEC 61850 PROTOCOL
As it is shown in the figure, the values of the settings of the setting group indicated with the ActSg are the ones with the FC
= SG in Logical Node SGphHiPTOC1, therefore the ones used by the high level of Phase Time Overcurrent protection
function in the relay.
On the other hand, as it is shown in the figure, the values of the settings of the setting group indicated with the EditSg are
the ones with the FC = SE in Logical Node SGphHiPTOC1.
GEK-106310AB
Figure 7–19:
Figure 7–20:
F650 Digital Bay Controller
7.3 IEC 61850 CONFIGURATOR
7
7-73