GE F650 Instruction Manual page 348

6 ACTUAL VALUES
6.2.12.2 CONTROL EVENTS
Actual> Status > Records Status > Control Events
In this screen Actual> Status > Records Status > Control Events, the status of the signals configured to launch the
control events can be seen, activated or not.
The F650 provides the possibility to configure 128 control events (at Settings>Relay Configuration > Control Events). In
the Actual > Records > Event Recorder > Control Events it is possible to see and retrieve the recorded control events to
a file, seeing the text and date and time and status of the preconfigured control event.
Table 6–31: CONTROL EVENTS STATUS
6.2.12.3 OSCILLOGRAPHY
Actual> Status > Records Status > Oscillography
The following figure shows the status of the different digital channels that can be programmed to be included in
oscillography records. When the signal associated to a specific channel is active, its LED will light up on this screen.
This screen shows as well the oscillography trigger status, active or inactive, by lighting up that channel.
Table 6–32: OSCILLOGRAPHY STATUS
The last three values shown are as follows:
NUMBER OF TRIGGERS: This is the number of the last oscillography record obtained in the relay. This value has a range
of 0 to 999.
CYCLES PER RECORD: This is the number of cycles contained in the oscillography record; this value depends on the
settings adjusted on the oscillography menu at Setpoint > Product Setup > Oscillography.
AVAILABLE RECORDS: This is the number of available oscillography records in the relay.
Values for these last 3 fields are reset every time the oscillography settings are modified.
GEK-106310AB
CONTROL EVENTS
CONTROL EVENT 1
CONTROL EVENT 2
...
CONTROL EVENT 128
OSCILLOGRAPHY
OSC DIG CHANNEL 1
OSC DIG CHANNEL 2
OSC DIG CHANNEL 3
OSC DIG CHANNEL 4
OSC DIG CHANNEL 5
OSC DIG CHANNEL 6
OSC DIG CHANNEL 7
OSC DIG CHANNEL 8
OSC DIG CHANNEL 9
OSC DIG CHANNEL 10
OSC DIG CHANNEL 11
OSC DIG CHANNEL 12
OSC DIG CHANNEL 13
OSC DIG CHANNEL 14
OSC DIG CHANNEL 15
OSC DIG CHANNEL 16
OSCILLO TRIGGER
NUMBER OF TRIGGERS
CYCLES PER RECORD
AVAILABLE RECORDS
F650 Digital Bay Controller
6.2 STATUS
6
6-25