GE F650 Instruction Manual page 533

13.1 SYMPTOMS AND RECOMMENDED ACTIONS
Firmware
Firmware
13
EnerVista 650 Setup
13-4
During the upgrading - Communication problems during the
procces for models upgrade procecure.
with IEC 61850 -The procedure
sometimes it ask for performed in a continuous way.
password and
sometimes not.
Password for - Model change
IEC61850 incorrect - Incorrect mac or serial number
InstallShield Setup A previous installation of any product
Initialization Error using InstallShield for installation may
6001 have corrupted some of the
InstallShield files used in the EnerVista
650 Setup installation
F650 Digital Bay Controller
13 F650 TROUBLESHOOTING GUIDE
• EnerVista 650 Setup program do not
ask for a password if the relay model is
has been not IEC61850 and
completed.
• If during the process there is any
problem and has to be started again,
this second time the program will ask
to confirm the IEC password.
• If the EnerVista 650 Setup program
is closed and started again during the
bootware and
process, the program will ask to
confirm the IEC password.
• The password is tied to the model,
MAC Address and serial number, any
change in any of the following will need
a password change.
• If the model has been modified to
add or replace
communication
61850 passwords will need to be
updated (contact the factory).
Delete (or rename) the 0701 folder
located in "C:\Program Files\Common
Files\InstallShield\Professional\RunTi
me\" and retry installation
the procedure is
firmware upgrade
any boards or
protocol, the IEC
GEK-106310AB