File Management - GE F650 Instruction Manual

4.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE 4 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES
File management with EnerVista 650 Setup software:
4.1.5.1 OFF LINE MODE
1
4
Store in the computer the Logic configuration files (*.pep, *.aut, *.lib) as
1.Note: "Relay and logic configuration" and "Protection and Control Settings" are required to be uploaded to the
F650 relay in order for the device to operate properly
4-6
Run EnerVista 650 Setup
Open a *.650 file
("File>Open" menu)
Modify Settings and relay
configuration
Is it necessary to
program
additional logic?
NO NO
Is the relay
completely
configured?
Save *.650 settings & configuration file
well as the *.650 for further logic changes.
Figure 4–3: OFF-LINE MODE FILE MANAGEMENT
F650 Digital Bay Controller
YES
Launch the Logic Configuration tool in EnerVista
650 Setup ("Setpoint>Logic Configuration")
Create new or modify the existing logic:
("File>Open Project")
Compile and save logic file (*.pep) and drawing
design (*.aut) in Logic Configuration tool
Exit PLC Graphic Editor and save the *.650 file
from the main application menu
YES

4.1.5 FILE MANAGEMENT

GEK-106310AB