GE F650 Instruction Manual page 418

7 IEC 61850 PROTOCOL
3.8 InMod
Value Description
0 phase-phase
1 phase-ground
3.9 PhLogic
Value Description
0 any phase
1 two phases
2 all phases
3.10 MaxNumShot
Value Description
0 1 Shot
1 2 Shots
2 3 Shots
3 4 Shots
7.2.7.3.3 TICS FOR 650 FAMILY OF RELAYS
Reference documentation: "TICS for 650 family of relays v1_7 firm3_60". This document describes the:
• Introduction
• TICS Template
1 Introduction
This document provides a template for the tissues conformance statement (TICS). According to the UCA QAP the TICS is
required to perform a conformance test and is referenced on the final certificate.
In this TICS template only tissues with a "green" status are considered since they become mandatory and thus must be
included in the UCA Device conformance test procedures.
"Green" Tissues listed in this document represent the current status of all Tissues for a date of the document creation.
As for some of the remaining tissues, they are not yet included in the test procedures, either because they are just a recom-
mendation or optional within the IEC 61850 documents, or because their respective proposals are not defined in such detail
to be implemented or tested, or because they are simply not applicable, just editorial, with no change for implementation
and testing.
The supported ("Sup") column indicates:
• Y: yes, the tissue is implemented in the device.
• N: no, the tissue is not implemented in the device.
• N.A.: not applicable, the tissue is not applicable for the device.
GEK-106310AB
Enum type : InMod
supported new enum Value of 650 Relay setting
value added
Y Y PHASE-PHASE
Y Y PHASE-GROUND
Enum type : PhLogic
supported new enum Value of 650 Relay setting
value added
Y Y ANY PHASE
Y Y TWO PHASES
Y Y ALL PHASES
Enum type : MaxNumShot
supported new enum Value of 650 Relay setting
value added
Y Y 1
Y Y 2
Y Y 3
Y Y 4
F650 Digital Bay Controller
7.2 IEC 61850 PROFILE FOR F650
7
7-49