GE F650 Instruction Manual page 119

4.2 HUMAN MACHINE INTERFACE (HMI)
4.2.5.6 VIEW SETTINGS
To enter this menu press the enter/shuttle key when the option "View Settings" is selected in main menu (). A secondary
level will be displayed with different sublevels as shown on Table 4.30:. Pressing up-down keys or rotating the shuttle key,
(left for moving up and right for moving down) select the next level to be displayed (), press the enter/shuttle key again to
enter in next level and press esc key to return to previous level if desired. This navigation will be performed the same for all
the menus in "View Settings". Once the last sublevel is reached, move up and down to visualize the settings selected.
Table 4.30: GENERAL OVERVIEW OF "VIEW/CHANGE SETTINGS" MAIN MENU
MAIN SETTINGS MENU
Product Setup >
4
System Setup >
Protection Element >
4-46
4 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES
FIRST LEVEL
Communication >
Fault Report
Oscillography
Demand
Time Settings
General Settings
Breaker >
Phase Current >
F650 Digital Bay Controller
SECOND LEVEL
Serial Ports
Ethernet >
ModBus Protocol
DNP3 Slave (Available for
standard and IEC61850
models)>
IEC 870-5-104(Available for
standard and IEC61850
models)>
SNTP
PROCOME (Available for
procome models only).
Breaker Settings
Breaker Maintenance
Phase TOC High >
Phase TOC Low >
Phase IOC High >
Phase IOC Low >
THIRD LEVEL
Ethernet 1
Ethernet 2
DNP3 Slave 1
DNP3 Slave 2
DNP3 Slave 3
Phase TOC High 1
Phase TOC High 2
Phase TOC High 3
Phase TOC Low 1
Phase TOC Low 2
Phase TOC Low 3
Phase IOC High 1
Phase IOC High 2
Phase IOC High 3
Phase IOC Low 1
Phase IOC Low 2
Phase IOC Low 3
GEK-106310AB