GE F650 Instruction Manual page 336

6 ACTUAL VALUES
The AUTORECLOSE INTERNAL STATUS are internal signals provided by the autoreclose unit:
AR CLOSE BREAKER:
AR OUT OF SERVICE:
AR READY:
AR LOCKOUT:
AR BLOCK:
AR RCL IN PROGRESS:
AR LCK BY ANOMALY:
AR LCK BY FAIL OPEN:
AR LCK BY FAIL CLOSE:
AR LCK BY USER:
AR LCK BY CONDS:
AR LCK BY TRIPS:
AR LCK BY SHOTS:
AR BLK AFTER 1 SHOT:
AR BLK AFTER 2 SHOT:
AR BLK AFTER 3 SHOT:
AR BLK AFTER 4 SHOT:
AR BLOCK BY LEVEL:
AR BLOCK BY PULSE:
AR STATUS:
AR LOCKOUT MODE:
AR BLOCK MODE:
GEK-106310AB
Breaker close command given by the autoreclose
Autoreclose out of service (Disabled)
Autoreclose in service
Autoreclose in lockout status (finished cycled-definite trip)
Autoreclose blocked (by input, logic, others, etc).
Cycle in course (autoreclose in progress).
Autoreclose in "Lockout" by anomaly.
Autoreclose in "Lockout" by a failure in opening the breaker.
Autoreclose in "Lockout" by a failure in closing the breaker.
Autoreclose in "Lockout" by manual close.
Autoreclose in "Lockout" by conditions. See input conditions configuration.
Autoreclose in "Lockout" by maximum number of trips.
Autoreclose in "Lockout" at the end of cycle – Definite trip.
Signal sent by the autoreclose after the 1
Signal sent by the autoreclose after the 2
Signal sent by the autoreclose after the 3
Signal sent by the autoreclose after the 4
Autoreclose blocked by level. See AR block signals configuration
Autoreclose blocked by pulse. See AR block signals configuration
Autoreclose status (in service – out of service)
Relay "Lockout" status.
Relay "Block" status
F650 Digital Bay Controller
st
shot.
nd
shot.
rd
shot.
th
shot.
6.2 STATUS
6
6-13