Iec 61850 Profile For F650; Overview - GE F650 Instruction Manual

7.2 IEC 61850 PROFILE FOR F650

7.2IEC 61850 PROFILE FOR F650
IEC 61850 is a series of standards describing client/server and peer-to-peer communications, substation design and
configuration, testing, environmental and project standards.
The 10 parts of the standard IEC 61850 are as listed in the following tables:
1.1.1 System Aspects
Part 1: Introduction and Overview
Part 2: Glossary
Part 3: General Requirements
Part 4: System and Project Management
Part 5: Communication Requirements for Functions and Device Models
1.1.2 Configuration
Part 6: Configuration Description Language For Communication In Electrical Substa-
tions Related To IEDs
1.1.3 Testing
Part 10: Conformance Testing
The following parts define how the IED behaves:
1.1.4 Data Models
Basic Communication Structure for Substations and
Part 7-4: Compatible Logical Node Classes and Data Classes
Part 7-3: Common Data Classes
1.1.5 Abstract Communications
7
Basic Communication Structure for Substations and
Part 7-2: Abstract Communication Services Interface (ACSI)
Part 7-1: Principles and Models
1.1.6 Mapping to real Communication Networks (SCSM)
Specific Communication Service Mapping (SCSM)
Part 8-1: Mappings to MMS
(ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3
Part 9-1: Sampled Values Over Serial Unidirectional Multidrop
Part 9-2: Sampled values over ISO/IEC 8802-3
Mapping on a IEEE 8802-3 based Process Bus
These documents can be obtained from the IEC (http://www.iec.ch). It is strongly recommended that all those involved with
any IEC 61850 implementation obtain this document set.
7-6
Feeder Equipment
Feeder Equipment
Point to Point Link
F650 Digital Bay Controller
7 IEC 61850 PROTOCOL

7.2.1 OVERVIEW

GEK-106310AB