Rear Panel Descriptions; Ac Power Receptacle; Web-Based Interface - Dell PowerConnect 3048 User Manual

Fast ethernet managed switch
Hide thumbs Also See for PowerConnect 3048:
Table of Contents

Advertisement

 
Link/Act Mode
Off
 
Steady green
 
Blinking green There is data transmission on the port.
Speed Mode
Off
 
Steady green
Duplex/Collision Mode Off
 
Steady green
 
Blinking green Port is operating on Half-Duplex and a collision occurs.
 
10/100/1000 Ports
 
Link/Act Mode
Off
 
Steady green
Blinking green There is data transmission on the port.
 
Speed Mode
Off
 
Steady green
Duplex/Collision Mode Off
 
Steady green
 
Blinking green Port is operating on Half-Duplex and a collision occurs.
Mini-GBIC Ports
 
Link/Act Mode
Off
 
Steady green
 
Blinking green Port is active.
Speed Mode
Off
 
Steady green
Duplex/Collision Mode Off
 
Steady green

Rear Panel Descriptions

 The rear panel of the system contains the gigabit stacking ports and an AC power receptacle.
 

AC Power Receptacle

 The switch automatically adjusts its power setting to any supply voltage in the range 90-240 volts AC.
Management
 The following sections describe methods you can use to manage the switch.

Web-Based Interface

 After you have successfully installed the switch, you can configure the switch, monitor the LED panel, and display statistics graphically using a Web browser
like Netscape Navigator version 4.0 and higher or Microsoft® IE version 4.01 and higher.
 
NOTE:
To access to the switch via a Web browser, the PC running the Web browser must have IP- based network access to the switch.
No 10/100-Mbps link is established.
A link is established on the port.
A 10-Mbps link is established or no link.
A 100-Mbps link is established on the port.
Port is operating on Half-Duplex mode or no link.
Port is operating on Full-Duplex mode.
No 10/100/1000-Mbps link is established.
A link is established on the port.
A 10-Mbps or 100-Mbps link is established or no link.
A 1000-Mbps link is established on the port.
Port is operating on Half-Duplex mode or no link.
Port is operating on Full-Duplex mode.
No link is established on mini-GBIC port.
A link is established on the mini-GBIC port.
No link.
A 1000-Mbps link is established on the GBIC port.
No link.
Port is operating on Full-Duplex mode and the link is up.

Advertisement

Table of Contents
loading

Table of Contents