Replacing The Light Engine Exhaust Fan (#12) - Christie Crimson Series Service Manual

6. Replace the fan.
7. To re-install, follow these steps in reverse order.

Replacing the light engine exhaust fan (#12)

The light engine exhaust fan draws hot air out of the light engine.
1. Remove the top cover (on page 42).
2. Remove the light engine cover (on page 79).
3. Disconnect the Fan 12 harness and remove the harness from the clips.
4. Loosen the four captive screws securing the fan bracket and pull it up to remove it.
5. Remove the four screws securing the fan to the light engine and remove it.
6. Replace the fan, if required.
7. To re-install, repeat these steps in reverse order.
Crimson Service Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102733-02 Rev. 1 (01-2020)
Copyright 2020 Christie Digital Systems USA, Inc. All rights reserved.
©
Ventilation and cooling
51