Table of Contents
Advertisement
Configuring IP Fax
Configuring IP fax options
MIB field name
eventTimeStamp
eventInOctets
eventOutOctets
eventXmitRate
eventDataRate
eventUserIPAddress
eventUserName
eventModemSlotNumber
eventModemOnSlot
ssnActiveUserName
ssnActiveUserIPAddress
ssnActiveCurrrentService:
ipFax(19)
RADIUS support for IP fax operation
The following RADIUS attributes, which appear in Accounting Stop packets, provide
outgoing and incoming call values for IP fax calls:
7-10
Reports
For an IP fax call, the time that the modem is reserved for an
outgoing call request. For any other type of call, this field
reports the actual connected time. This information is available
when the event type is callCleared(3).
Total received bytes for the call. This information is available
when the event type is callCleared(3).
Total transmitted bytes for the call. This information is available
when the event type is callCleared(3).
Negotiated transmitted baud rate used throughout the call. This
information is available when the event type is callCleared(3).
For IP fax, transmitted and received baud rates are the same.
Negotiated received baud rate used throughout the call. This
information is available when the event type is callCleared(3).
For IP fax, transmitted and received baud rates are the same.
User's IP address. This information is available when the event
type is nameChanged(5).
Username. This information is available when the event type is
callOriginated(1).
Slot in which the modem is located. This information is avail-
able when the event type is callOriginated(1).
Modem in use. This information is available when the event
type is callOriginated(1).
Active username.
Active user's IP address.
ipFax(19) service is in use for an outgoing IP fax call.
MAX 6000/3000 Network Configuration Guide
Advertisement
Table of Contents
