Table of Contents
Advertisement
Configuring Individual WAN Connections
Configuring PPP connections
Ethernet
Connections
Settings in a RADIUS profile
RADIUS uses the following attribute-value pairs for PPP connections:
Attribute
Password (2)
Service-Type (6)
Framed-Protocol (7)
Framed-MTU (12)
Ascend-Link-Compressio
n (233)
4-44
VJ Comp=Yes
CBCP Enable=No
BACP=
Dyn Alg=
Sec History=
Add Pers=
Sub Pers=
Target Util
Connection profile
Encaps=PPP
Encaps Options
Send Auth=None
Send Name=N/A
Send PW=N/A
Recv PW=
MRU=1524
LQM=No
LQM Min=600
LQM Max=600
Link Comp=Stac
VJ Comp=Yes
CBCP Mode=N/A
CBCP Trunk Group=N/A
Split Code.User=N/A
Value
Password expected from the caller for a dial-in connection.
Type of services the link can use. Set to Framed for dial-in PPP
connections that do not use a terminal-server login, or Login for
async PPP connections. If not specified, the service type is
unrestricted.
Encapsulation protocol. Set to PPP (1) to enable a user to dial in
with PPP framing or dial in unframed and then change to PPP
framing.
Maximum number of bytes the MAX TNT can send in a single
packet (from 1 to 1524, default 1524).
Link-compression method to use.
MAX 6000/3000 Network Configuration Guide
Advertisement
Table of Contents
