The Frame Relay Connection Parameters - Lucent Technologies MAX 6000 Network Configuration Manual

Configuring Frame Relay
Configuring a DLCI logical interface
For gateway connections:
Ethernet
Connections
For Frame Relay circuits:
Ethernet
Connections
For FR Direct connections:
Ethernet
Connections

The Frame Relay connection parameters

This section provides some background information about the Frame Relay connection
parameters. For detailed information about each parameter, see the MAX Reference.
Gateway connections (Encaps=FR)
Gateway connections require FR encapsulation, a Frame Relay profile name, and a DLCI.
Your Frame Relay provider tells you the DLCI to assign to each connection.
A Connection profile that specifies Frame Relay encapsulation must include a DLCI to
identify the first hop of a permanent virtual circuit (PVC). The MAX does not allow you to
enter duplicate DLCIs, except when they are carried by separate physical links specified in
different Frame Relay profiles.
5-14 Preliminary January 4, 2001
Connection profile
Encaps=FR
Encaps options...
FR Prof=pacbell
DLCI=16
Circuit=N/A
Route IP=Yes
Ip options...
LAN Adrs=10.2.3.4/24
Connection profile
Encaps=FR_CIR
Encaps options...
FR Prof=pacbell
DLCI=16
Circuit=circuit-1
Connection profile
Encaps=PPP
Route IP=Yes
Ip options...
LAN Adrs=10.2.3.4/24
Session options...
FR Direct=Yes
FR Prof=pacbell
DLCI=16
MAX 6000/3000 Network Configuration Guide