Lucent Technologies MAX 6000 Network Configuration Manual page 299

Table 6-2. X.3 parameters (continued)
Parameter
3
4
5
6
7
8
9
10
11
MAX 6000/3000 Network Configuration Guide
Description Possible values
Data forwarding 0—None (full packet)
characters 1—Alphanumeric
2—Carriage return (the default)
4—ESC, BEL, ENQ, ACK
8—DEL, CAN, DC2
16—ETX, EOT
32—HT, LT, VT, FF
64—All other characters in columns 0 and 1
of International Alphabet #5
Idle timer delay 0—No timer
1–255—Delay value in twentieths of a second
Ancillary device 0—Not operational
control 1—Use X-ON (DC1 of International Alphabet
#5) and X-OFF (DC3 of International
Alphabet #5)
PAD service and 0—Do not transmit service signals
command signals 1—Transmit service signals
PAD operation on 0—No action
receipt of break 1—Transmit Interrupt packet
signal from the 2—Reset
start-stop mode 4—Indication of break (PAD message)
DTE 8—Escape from data transfer
16—Discard output to DTE-C
21—Combine actions 1, 4, and 16
Discard output 0—Normal data delivery (the default)
1—Discard output to DTE-C
Padding after 0—No padding
carriage return 1–7—Number of padding characters inserted
after the carriage return
Line folding 0—No line folding (the default)
1–255—Number of characters per line
Terminal-server 10—50 bps
access speed 5—75 bps
9—100 bps
0—110 bps
1—134.5 bps
6—150 bps
8—200 bps
2—300 bps
...
Configuring X.25
Setting up X.25 PAD sessions
6-15