Lucent Technologies MAX 6000 Network Configuration Manual page 328

Configuring X.25
Always On/Dynamic ISDN (AO/DI)
4
5
6-44
Wed Dec 23 16:20:48 1998
User-Name="aodi1"
NAS-Identifier=12.126.212
NAS-Port=10102
NAS-Port-Type=Sync
Acct-Status-Type=Start
Acct-Delay-Time=0
Acct-Session-Id="212345678"
Acct-Authentic=RADIUS
Ascend-Multilink-ID=1
Ascend-Num-In-Multilink=3
Ascend-Modem-PortNo=5
Ascend-Modem-SlotNo=9
Framed-Protocol=MP
Framed-Address=1.2.3.4
The AO/DI client drops a B channel from line 1, channel 2. The following Stop record is
generated:
Wed Dec 23 16:24:48 1998
User-Name="aodi"
NAS-Identifier=12.126.212
NAS-Port=10102
NAS-Port-Type=Sync
Acct-Status-Type=Stop
Acct-Delay-Time=0
Acct-Session-Id="212345678"
Acct-Authentic=RADIUS
Acct-Session-Time=200
Acct-Input-Octets=3471
Acct-Output-Octets=3507
Acct-Input-Packets=44
Acct-Output-Packets=45
Ascend-Disconnect-Cause=185
Ascend-Connect-Progress=83
Ascend-Xmit-Rate=56000
Ascend-Data-Rate=56000
Ascend-PreSession-Time=0
Ascend-Pre-Input-Octets=106
Ascend-Pre-Output-Octets=143
Ascend-Pre-Input-Packets=5
Ascend-Pre-Output-Packets=5
Ascend-Multilink-ID=1
Ascend-Num-In-Multilink=2
Ascend-Modem-PortNo=5
Ascend-Modem-SlotNo=9
Framed-Protocol=MP
Framed-Address=1.2.3.4
The AO/DI client drops the other B channel from line 1, channel 1. The following Stop
record is generated:
Wed Dec 23 16:28:48 1998
User-Name="aodi"
NAS-Identifier=12.126.212
NAS-Port=10101
NAS-Port-Type=Sync
MAX 6000/3000 Network Configuration Guide