Configuring X.25 Pad Users From Radius - Lucent Technologies MAX 6000 Network Configuration Manual

Configuring X.25

Configuring X.25 PAD users from RADIUS

Table 6-6. X.25 diagnostic field values (continued)
Hex
value
30
31
32
33
34
40
41
42
43
44
45
46
47
48
49
4A
4B
4C
Configuring X.25 PAD users from RADIUS
Using DNIS/CLID, you can now authenticate X.25 PAD users by means of RADIUS. This
feature is useful when you require more than 3 X.25 connection profiles. A RADIUS user can
set the attribute Ascend-X25-Pad-X3-Profile to Custom and use the
Ascend-X25-Pad-Parameters attribute to configure the PAD X.3 parameters on a per-user
basis. However, when the PAD users are configured from RADIUS, the ability to store a
6-24
Dec Diagnostic
value
48 Timer expired
49 For incoming call (or for DTE timer expired for call
request)
50 For clear indication (or for DTE timer expired or
retransmission count surpassed for clear request)
51 For reset indication (or for DTE timer expired or
retransmission count surpassed for reset request)
52 For restart indication (or for DTE timer expired or
retransmission count surpassed for restart request)
64 Call setup, call clearing, or registration problem
65 Facility/registration code not allowed
66 Facility parameter not allowed
67 Invalid called address
68 Invalid calling address
69 Invalid facility/registration length
70 Incoming call barred
71 No logical channel available
72 Call collision
73 Duplicate facility requested
74 Nonzero address length
75 Nonzero facility length
76 Facility not provided when expected
MAX 6000/3000 Network Configuration Guide