Lucent Technologies MAX 6000 Network Configuration Manual page 235

Hide thumbs Also See for MAX 6000:

Table of Contents

You can configure the most specific slot and port by setting values other than zero. You can

configure the least specific slot and port by setting zero values. Table 4-1 shows the full-group

ordering from most specific to least specific.

Table 4-1. Full-group ordering of slot and port numbers

nonzero slot

As shown in Table 4-1, calls whose destination is a nonzero slot and a nonzero port are at the

top of the sort order, and calls to a zero slot and a zero port are at the bottom of the order. If a

match is within the same group in Table 4-1, the lower-numbered slot comes first, but if slots

are equal, the lower-numbered port comes first.

Table 4-2 shows the sorting order of a list of call routes, regardless of the order in which they

were initially entered. Field values that are not needed for this sorting (in this example) are not

Table 4-2. Example of sorting order

MAX 6000/3000 Network Configuration Guide

Configuring POTS capability on the MAX 6000 and MAX 3000

Sort order within the parameter

From the most specific to the least specific.

nonzero port

Trunk-Digital

Configuring Individual WAN Connections