Lucent Technologies MAX 6000 Network Configuration Manual page 442

Setting Up Virtual Private Networks
Configuring ATMP tunnels
The IP routing connection to the Foreign Agent uses the following parameters (shown with
sample settings):
Ethernet
Understanding the ATMP router mode parameters
This section provides some background information about configuring a Home Agent in router
mode. For detailed information about each parameter, see the MAX Reference.
Parameter
ATMP Mode
Type
Password
11-12
IP Adrs=10.1.2.3/24
IPX Frame=802.2
IPX Enet #=00000000
ATMP options...
ATMP Mode=Home
Type=Router
Password=private
SAP Reply=No
UDP Port=5150
GRE MTU=1472
Force fragmentation=No
Idle limit=0
ATMP SNMP Traps=No
Connections
any Connection profile
Station=foreign-agent
Active=Yes
Encaps=MPP
Dial #=555-1213
Route IP=Yes
Encaps options...
Send Auth=CHAP
Recv PW=foreign-pw
Send PW=home-pw
IP options...
LAN Adrs=10.65.212.226/24
Usage
For the Home Agent, the mode is Home.
When you set Type to Router, the Home Agent relies on routing (not a
WAN connection) to pass packets received through the tunnel to the
home network.
Used to authenticate the ATMP tunnel itself. Must match the password
specified in the Ascend-Home-Agent-Password attribute of each
mobile client's RADIUS profile. (All mobile clients use the same
password for that attribute.)
MAX 6000/3000 Network Configuration Guide