Lucent Technologies MAX 6000 Network Configuration Manual page 450

Setting Up Virtual Private Networks
Configuring ATMP tunnels
Or comparable settings in a RADIUS profile:
mclient Password = "local-password"
6
7
Example of configuring a Home Agent in gateway mode (IPX)
To configure the Home Agent in gateway mode to reach an IPX home network:
1
11-20
Encaps=MPP
Dial #=555-1213
Route IP=Yes
Encaps options...
Send Auth=CHAP
Recv PW=foreign-pw
Send PW=home-pw
IP options...
LAN Adrs=10.65.212.226/24
Service-Type = Framed-User,
Tunnel-Type = ATMP,
Tunnel-Server-Endpoint = "2.2.2.2:1234",
Tunnel-Password = "tunnel-password",
Tunnel-Private-Group-ID = "home-router"
Open a Connection profile and configure a nailed WAN link to the home network. For
example:
Ethernet
Connections
any Connection profile
Station=homenet
Active=Yes
Encaps=MPP
Dial #=N/A
Calling #=N/A
Route IP=Yes
IP options...
LAN Adrs=5.9.8.2/24
Telco options...
Call Type=Nailed
Group=1,2
Session options...
ATMP Gateway=Yes
MAX ATMP Tunnels=0
ATMP RIP=Send-v2
Exit the profile and, at the exit prompt, select the exit and accept option.
Open Ethernet > Mod Config > Ether Options and verify that the LAN interface has an IP
address (required for communication with the Foreign Agent) and can route IPX. For
example:
Ethernet
Mod Config
IPX Routing=Yes
Ether options...
IP Adrs=10.1.2.3/24
MAX 6000/3000 Network Configuration Guide