Lucent Technologies MAX 6000 Network Configuration Manual page 109

Is call received on a channel whose telephone number parameter
(Ch N #, Pri Num, Sec Num) does not match the called number?
Determine if call is net-to-net:
See MAXDAX section. Is the MAXDAX call net-to-net?
If Sub-Adr=Routing and the called number has an ISDN subaddress that matches
setting of V.110, DM, LAN, or Serial parameter, the call is not net-to-net.
If the called number (without subaddress) matches an Ans N# setting in an Ethernet
(Mod Config) or V.110 profile, or any digital modem profile, the call is not net-to-net.
If the called number (without subaddress) matches Ans # in a Net/T1 Line N profile, or
the call service matches Ans Svc in a Net/T1 Line N profile, or the call arrives on a
Leased 1:1 channel (see PBX Type parameter), it is net-to-net PBX.
If the called number (without subaddress) matches Ans N# in a Host/BRI or BRI/LT
profile or the call is answered on a channel whose slot (Ch N Slot, B1 Slot, B2 Slot)
parameter points to a Host/BRI or BRI/LT module, it is net-to-Net/BRI.
No
Does subaddress match DM?
Does subaddress match V.110?
Does subaddress match LAN?
Does subaddress match Serial?
Continue next page: "A" Continue next page: "B"
MAX 6000/3000 Network Configuration Guide
Does Sub-Adr=TermSel?
No
Does call have ISDN subaddress?
Does Sub-Adr=Routing?
Yes
No
No
No
No
Is call answered on a channel whose slot (Ch N
Slot, B1 Slot, B2 Slot) and port (Ch N Prt/Grp,
B1 Prt/Grp, B2 Prt/Grp) parameters point to a
serial-host port?
Is a serial-host (invs-mux) port
available?
Yes
Yes
Telephone number matches or called number not provided.
Is not net-to-net.
Yes
Is a digital modem available?
Yes
Is V.110 module available?
Yes
Is bridge/router module
available?
Yes Does called number with/without
subaddr. match Ans N# Port
Config (invs-mux) profile
setting?
No
No
Yes
Route call to it.
Configuring WAN Access
Configuring inbound calls
No
Do not answer.
Yes
Do not answer.
Is net-to-net
Route to indicated
T1 channel
or BRI line.
No
Reject call.
Yes
Route call to it.
No
Reject call.
Yes
Route call to it.
No
Reject call.
Yes
Route call to it.
Yes
If port available,
route call to it.
Otherwise, reject
call.
Yes
If port (invs-mux)
available, route
call to it. Other-
wise, reject call.
No
Reject call.
3-67