Navigation Area; Figure 16: Navigation; Table 83: Navigation - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-464 2/4 AI RTD configurable
7.3.3

Navigation area

The navigation area contains the following buttons:

Figure 16: Navigation

Press one of the buttons to display the corresponding parameters:

Table 83: Navigation

Button Function Description
Opens a page with parameters for
General
general settings
Opens a page with parameters for
Channel 1
channel 1 settings
Opens a page with parameters for
Channel 2
channel 2 settings
Opens a page with parameters for
channel 3 settings.
Channel 3 This button is only available if the
operating mode of the I/O module is set
to "4-channel".
Opens a page with parameters for
channel 4 settings.
Channel 4 This button is only available if the
operating mode of the I/O module is set
to "4-channel".
Opens a page for the scaling settings for
Scaling
channel 1 ... 2 (4).
Opens a page for the calibration settings
for channel 1 ... 4.
Calibration This button is only available if the
operating mode of the I/O module is set
to "4-channel".
Commissioning 95
Manual
Version 1.1.0