Drive Main Menus - YASKAWA E7N Technical Manual

Drive Main Menus

The Drive's parameters and monitoring functions are organized into groups called menus that make it easier to read and set
parameters. The Drive is equipped with five menus. The five menus and their primary functions are shown in Table 3.18 and
are directly available by pressing the MENU key.
Main Menu
- DRIVE -
Operation
- QUICK -
Quick Setting
- ADV -
Programming
- VERIFY -
Modified Constants
(Parameters)
- A.TUNE -
Auto-Tuning
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 3.18 Drive Main Menus
The Drive can be run in this menu. Also called the "Monitor" menu.
Use this menu for monitoring values such as frequency reference or output current, displaying fault
history or displaying the fault traces.
The Drive can be programmed in this menu.
Use this menu to set/read the most commonly used parameters.
The Drive can be programmed in this menu.
Use this menu to set/read every parameter.
The Drive can be programmed in this menu.
Use this menu to set/read the parameters that have been modified from their factory default settings.
For Bypass units Auto-Tuning can only be accomplished through the DriveWizard software
(Part Number DWST616-C2). A free download from www.drives.com.
The Drive can be programmed in this menu.
Auto-tune the Drive in order to utilize the bi-directional speed search feature.
Control Panel 3 - 11
Primary Function(s)