I Dv Set Mode Items - Icom IC-91A Instruction Manual

11
MENU SCREEN OPERATION

I DV set mode items

The following items are selectable by the IC-91AD or optional
UT-121 is installed into the IC-91A.
D D Auto reply
This function replies to an individual station call even you are
away from the transceiver.
After a manual transmission (pushing [PTT]), the Auto Reply
setting returns to OFF automatically.
• OFF : No reply is performed even a call is received.
(default)
• ON : Sets caller's call sign and reply to the call with
the set own call sign automatically.
• VOICE : Sets caller's call sign and reply to the call with
the recorded audio in REPLY VOICE memory of
DV VOICE MEMO.
r
NOTE: When "ON" or "VOICE" is set to the auto reply
function, the power save function
tomatically to receive call sign signal properly.
92
r
is turned OFF au-
(p. 88)
D D Digital code
Sets the desired digital code for digital code squelch opera-
tion. Total of 100 codes (00–99) are available.
D D DV data TX
During low-speed data operation, auto data transmission
function is available. This function transmits when data has
been input from PC via the [DATA] jack.
r
(default: 00)
(default: PTT)
r