Menu Screen Description; D Using The Menu Screen - Icom iF7010 Series Operating Manual

6
MENU SCREEN

Menu screen description

The user can open the "Menu" screen using the
[Menu] key.
In the "Menu" screen, the items are categorized.
Depending on the presetting, the user can select
various functions and set the transceiver settings in
the "Menu" screen.
L The "Menu" screen has 2 display types: Icon type
and List type. In this operating guide, the Icon type
is used for the main illustration.
NOTE: The language displayed on the "Menu"
screen is set to English by default, but a dealer
can change it to another language using the
programming software.
In this case, the item names are displayed on the
screen in the language set by the dealer, instead of
z Categories
English.
Channel Signaling
/Scan /Call
Control
* 2
Head

D Using the Menu screen

Example: Starting a Scan
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select "Channel/Scan,"
then push [OK].
3. Push [Up] or [Down] to select "Scan Start/Stop,"
then push [OK].
* 1
Trunking Functions
Information Utility
GPS Voice Rec Audio
Setting
Display Sensor
* 1 For only the revision 2.00 or later.
* For only the mobile type.
2
4. Push [Up] or [Down] to select "ON," then push
[OK].
• The Scan starts.
5. Hold down [Back] for 1 second to return to the
standby screen.
6-2
"Menu" screen
Icon type
List type
SD Card Bluetooth
Vibration Clock
: Push [Right]
: Push [Left]