Termserver Setup - Toptech Systems MultiLoad II User Manual

Chapter 4 – General Configuration
T
4.3.3
ERMSERVER
Parameter
Com0 Port(7000)
Com0 Port(7010)
Com1 Port(7001)
Com1 Port(7011)
Com2 Port(7002)
Com2 Port(7012)
Firmware Version 3/4.31.37
S
ETUP

TERMSERVER SETUP

Com0 Port(7000):
Com0 SSL Port(7010):
Com1 Port(7001):
Com1 SSL Port(7011):
Com2 Port(7002):
Com2 SSL Port(7012):
Description
Next Prev
This parameter can be configured to allow external communication from any system via
Ethernet and pipe this data transfer to the serial port.
Protocols supported are Smith, Daniels, Brooks, and Modbus RTU.
This parameter can be configured to allow external communication from any system
which understands the SSL TLSv1.2 protocol. So the Ethernet data can be piped to the
serial port.
Protocols supported are Smith, Daniels, Brooks, and Modbus RTU.
This parameter can be configured to allow external communication from any system via
Ethernet and pipe this data transfer to the serial port.
Protocols supported are Smith, Daniels, Brooks, and Modbus RTU.
This parameter can be configured to allow external communication from any system
which understands the SSL TLSv1.2 protocol. So the Ethernet data can be piped to the
serial port.
Protocols supported are Smith, Daniels, Brooks, and Modbus RTU.
This parameter can be configured to allow external communication from any system via
Ethernet and pipe this data transfer to the serial port.
Protocols supported are Smith, Daniels, Brooks, and Modbus RTU.
This parameter can be configured to allow external communication from any system
which understands the SSL TLSv1.2 protocol. So the Ethernet data can be piped to the
serial port.
Protocols supported are Smith, Daniels, Brooks, and Modbus RTU.
ENABLED
DISABLD
ENABLED
DISABLD
ENABLED
DISABLD
Exit Enter
72