Toptech Systems MultiLoad II User Manual page 494

Chapter 16 – Firmware Revision History
8/14/2014 PS
Enhancement: Added a Start and Stop Tank Trigger for unloading of the tanks.
8/15/2014 PS
Fix: Ensure that all Custom Logic Diagnostic parameters are fully displayed and
not cut off.
8/21/2014 PS
Fix: If additive or sampler values are out of screen range in the meter status
screens MultiLoad will show #######.
8/25/2014 PS
Enhancement: Added MRSA, MRSA32, MRTA, MRTA32 communication functions to request
sampler and tank alarms.
Fix: Remove all remaining all_stop references.
Rewrite of picklist routines.
Remove SCS logic that force configuration parameters.
8/27/2014 PS
Added SCS Prompt Mode which allows the user to prompt for Observed BSW and/or
Observed Density at the end of the transaction.
8/28/2014 PS
Enhancement: Allow the transaction viewer on MultiLoad to show Observed Input
Data. Transaction Website is also updated.
Fix: Additive Diagnostic was showing UND ADTV instead of SWING ALARM.
Fix: Product filter in Product Setup Screen was not working correctly.
9/5/2014 PS
SCS supports up to 4 meters and 4 components.
Only SCS will support Tank farm.
Fix: If using password 4447 top bar of transaction viewer would not be yellow.
Fix: VSX account check was broken.
9/8/2014 TF
Fix when using start_trigger and start_transaction_fcm that it doesn't chop off
the last number. Previously if the card number was 00000001 it would show 0000000.
9/9/2014 PS
Fix: Communication picklist was missing PTB Alibi Printer option.
Fix: Simulation page would not be shown even when entering the manual link into
internet explorer. Using the simulation inputs had no affect anyway.
9/14/2014 PS
Enhancement: Encrypt SSL keys.
Changed Toptech logo to latest brand standard.
Fix: UAP Custom Prompting will always add a : to the end of the prompt string.
Update all SSL keys and procedures.
9/15/2014 PS
Added Diverter Mode, Divert Open Valve, and Divert BSW Error Real Time values to
Custom Logic.
9/16/2014 TF
Added eMail Trace logging, and a Trace parameter.
9/16/2014 PS
Firmware Version 3/4.31.37
494