Table of Contents
Advertisement
Chapter 10– Views and Inquiries
LOCATN
DESCRIPTION
10.17 V
F
IEW
IRMWARE
The Firmware Information screen displays the current version number of the firmware running on the MultiLoad II
unit. It also displays the build date, and the checksum. All three are used to specify the exact version of firmware
that is currently running.
Firmware Version 3/4.31.37
This is the location of the configuration parameter. For example, P01M01 means the
parameter is for Preset 1 Meter 1. If there are shared ports they will be listed below
each other.
This is the description of the parameter that is assigned to that port.
I
NFORMATION
FIRMWARE INFO
Version:
Build Date:
Checksum:
v4.31.24
Aug 10 2015
0x00000000
Exit
349
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiLoad II and is the answer not in the manual?
Questions and answers
Greetings, how can multiload ll totalizers be reset?
The resettable totalizers on the Toptech Systems MultiLoad II can be reset using the CLR (Clear) key. Non-resettable totalizers cannot be reset.
This answer is automatically generated