Table of Contents
Advertisement
Chapter 10– Views and Inquiries
10.8
V
BSW1
IEWING
From the Views and Inquiry Menu select BSW1. After selecting the preset, the BSW1 screen displays:
Parameter Descriptions:
BSW1 Input
BSW1 Unadjusted
BSW1 Offset
BSW1 Adjusted
10.9
V
BSW2
IEWING
From the Views and Inquiry Menu select BSW2. After selecting the preset, the BSW2 screen displays:
Firmware Version 3/4.31.37
PRE #1 BSW1
BSW1 Input:
BSW1 Unadjusted:
[1]BSW1 Offset:
[2]BSW1 Adjusted:
Next
Displays the live mA value that is being read by the analog input.
Displays the real-time BSW1.
Displays the current BSW1 offset value, which is the difference between the
BSW1 Unadjusted value and the BSW1 Adjusted (observed relative density)
value.
Displays the observed BSW1 as a result of applying the BSW1 offset.
08.000mA
+25.00%
+0.00%
+25.00%
Prev
Exit
336
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiLoad II and is the answer not in the manual?
Questions and answers
Greetings, how can multiload ll totalizers be reset?
The resettable totalizers on the Toptech Systems MultiLoad II can be reset using the CLR (Clear) key. Non-resettable totalizers cannot be reset.
This answer is automatically generated