Table of Contents
Advertisement
Chapter 10– Views and Inquiries
Parameter Descriptions:
Pressure Input
Pressure Unadjusted
Pressure Offset
Pressure Adjusted
10.6
V
D
IEWING
From the Views and Inquiry Menu select Density. After selecting the preset and meter, the Density screen
displays:
Firmware Version 3/4.31.37
PRE #1 MTR #1 PRESSURE
Pressure Input:
Pressure Unadjusted:
[1]Pressure Offset:
[2]Pressure Adjusted:
Displays the live mA value that is being read by the analog input.
Displays the real-time pressure.
Displays the pressure offset value, which is the difference between the Pressure
Unadjusted value and the Pressure Adjusted (observed pressure) value.
Displays the observed pressure as a result of applying the pressure offset.
ENSITY
PRE #1 MTR #1 DENSITY
Density Input:
Density Unadjusted:
[1]Density Offset:
[2]Density Adjusted:
Next
Prev
Exit
Next
Prev
Exit
08.000mA
+162.50
+0.00
+162.50
08.001mA
+300.0
+0.0
+300.0
334
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiLoad II and is the answer not in the manual?
Questions and answers
Greetings, how can multiload ll totalizers be reset?
The resettable totalizers on the Toptech Systems MultiLoad II can be reset using the CLR (Clear) key. Non-resettable totalizers cannot be reset.
This answer is automatically generated