Toptech Systems MultiLoad II User Manual page 289

Chapter 9 – Weights & Measures
Table
ASTM1250-
2004 Table 6B



ASTM1250-
2004 Table 6C



ASTM1250-
2004 Table 6D



ASTM1250-
2004 Table 6X
ASTM1250-
2004 Table 24A


ASTM1250-
2004 Table 24B



ASTM1250-
2004 Table 24C



Firmware Version 3/4.31.37
Description
This table provides CTL factors for correcting volumes of gasolines at observed
temperatures to the volume at 60 F, using the method outlined in Chapter 11.1.6.1 of the
2004 standard. Use this table if the following conditions exist:
The liquid is a refined product
API Gravity @ 60 F is known
Reference Temperature is 60 F
This table provides CTL factors for correcting volumes of petroleum liquids at observed
temperatures to the volume at 60 F, using the method outlined in Chapter 11.1.6.1 of the
2004 standard. Use this table if the following conditions exist.
The liquid is a refined product or crude oil
Coefficient of Expansion @ 60 F is known
Reference Temperature is 60 F
This table provides CTL factors for correcting volumes of lube oils at observed temperatures
to the volume at 60 F, using the method outlined in Chapter 11.1.6.1 of the 2004 standard.
Use this table if the following conditions exist.
The liquid is a lube oil
API Gravity @ 60 F is known
Reference Temperature is 60 F
This table provides CTL factors for correcting volumes of a petroleum product at observed
temperatures. This table allows specifying the commodity being measured, the coefficient
of expansion, the reference temperature, and units of measure for density, pressure, and
temperature.
This table provides CTL factors for correcting volumes of crude oil at observed
temperatures to the volume at 60 F, using the method outlined in Chapter 11.1.6.1 of the
2004 standard. Use this table if the following conditions exist:
The liquid is crude oil
Relative Density at 60 F is known
Reference Temperature is 60 F
This table provides CTL factors for correcting volumes of gasolines at observed
temperatures to the volume at 60 F, using the method outlined in Chapter 11.1.6.1 of the
2004 standard. Use this table if the following conditions exist:
The liquid is a refined product
Relative Density at 60 F is known
Reference Temperature is 60 F
This table provides CTL factors for correcting volumes of petroleum liquids at observed
temperatures to the volume at 60 F, using the method outlined in Chapter 11.1.6.1 of the
2004 standard. Use this table if the following conditions exist.
The liquid is a refined product or crude oil
Coefficient of Expansion @ 60 F is known
Reference Temperature is 60 F
289